China supplier Worm Gearbox Used in Paper Industry components of gearbox

Product Description

The gearbox  is generally used for low-speed and high-torque transmission equipment. The power of the electric motor, internal combustion engine or other high-speed operation is achieved through the gear of the input shaft of the reducer meshing with the large gear on the output shaft. The ratio of the number of teeth is the transmission ratio.There 4 type gearbox for paper mill,pls check the follow informations:

Worm/spiral bevel gearbox reducer
1. The F series parallel shaft helical gear reducer is manufactured in accordance with international technical requirements and has a high technological content.
2. It saves space, is reliable and durable, has high overload capacity, and the power can reach more than 90KW.

3. F parallel shaft helical gear reducer has low energy consumption, superior performance and efficiency as high as 95%.
4. Parallel shaft helical gear reducer has low vibration, low noise and high energy saving. It is made of high-quality steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated.
5. After precision machining, the shaft parallelism and positioning accuracy are ensured. All of this constitutes the gear transmission assembly. The reducer is equipped with various motors, forming a mechatronics, which fully guarantees the quality characteristics of the geared motor products.
 
2.Features:
1. Parallel output, compact structure, large transmission torque, stable operation, low noise and long life.
2. Installation method: base installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
3. The rotation direction of the input and output of the basic two-stage is the same, and the three-stage is opposite; another consultation is needed for F/R combination.
4. Output mode: hollow shaft output or CZPT shaft output.
5. Average efficiency: 96% for level two, 94% for level three, and 85% for F/R combination.

 3. Technical parameters:

Speed ratio range: basic type 3.81~281.71, F/R combination type can reach 31434
Torque range: 200~18000 Nm
Power range: 0.18~200 kW

1. The S series helical gear worm reducer has a high technological content. It has a combination of helical gear and worm gear for integrated transmission, which improves the torque and efficiency of the machine. This series of products have complete specifications, wide speed range, good versatility, adapt to various installation methods, safe and reliable performance and long life, and have implemented international standards.
  2. The surface of the body has a heat dissipation effect, strong vibration absorption, low temperature rise and low noise.
  3. The machine has good sealing performance and strong adaptability to the working environment.
  4. The helical gear worm gear reducer has high transmission accuracy, which is especially suitable for working in occasions with frequent starting. It can be connected to various reducers and equipped with various types of motor drives. It can be installed in a 90 degree transmission operation.
position.
  5. The key components of the S helical gear reducer are made of highly wear-resistant materials and have undergone special heat treatment. They have the characteristics of high machining accuracy, stable transmission, small size, large carrying capacity, and long life.
  6. The helical gear reducer can be equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the product.
 
2.Features:
  1. Combination of helical gear and worm gear, compact structure and large reduction ratio.
  2. Installation method: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
  3. Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
  4. Average efficiency: reduction ratio of 7.5-69.39 is 77%; 70.43-288 is 62%; S/R combination is 57%.
  5. Combine with R series to get larger speed ratio.

3. Technical parameters:
 

Speed ratio range: basic type 9.96~244.74, S/R combination type can reach 8608
Torque range: 43~4200 Nm
Power range: 0.18~22 kW

 

About Us

ZheJiang CZPT Paper Tech

We are a China Based engineering company and machinery supplier committed to offer complate solution and provide high-cost-performance equipments related to stock preparation and paper-making industry.For years,we have insisted on taking customer’s value as our center and having strict quality-control and innovation in the whole process. 

With advantage technology and excellent equipment,we provide one-stop service from consultation,process design and optimization,manufacture,installation,commissing and personnel training and so on.At the same time,we can supply all kinds of stock preparation and paper making equipment and accessories.Besides,we can custom design according to customers’ requirements.

Our products have reliable quality and superior performance and have been exported to Poland,Greece,Turkey,Iran,India,Packistan,Bangladesh,Thailand,Indonesia,Philippines,Malaysia,Vietnam,Mexico,Guatemala,Costa Rica,Columbia,Egypt etc.We have established long-term cooperation relationship with many paper mills and agent.

Honesty,cooperation and CZPT are important to us.We insisted on serve our customers with high quality products,sincere service and good reputation.We are appreciated for the long-term trust and favor from our customers.Hope we can cooperate sincerely and make progress together with our new and old customer.

Customer’s satisfaction is our goal !

Contact us to have more details about “Gearbox “Parallel shaft helical gear reducer
 

What are the Noise Levels Associated with Worm Gearboxes?

The noise levels associated with worm gearboxes can vary depending on several factors, including the design, quality, operating conditions, and maintenance of the gearbox. Here are some key points to consider:

  • Design and Quality: Well-designed and high-quality worm gearboxes tend to produce lower noise levels. Factors such as gear tooth profile, precision manufacturing, and proper alignment can contribute to reduced noise.
  • Gear Engagement: The way the worm and worm wheel engage and mesh with each other can impact noise levels. Proper tooth contact and alignment can help minimize noise during operation.
  • Lubrication: Inadequate or improper lubrication can lead to increased friction and wear, resulting in higher noise levels. Using the recommended lubricant and maintaining proper lubrication levels are important for noise reduction.
  • Operating Conditions: Operating the gearbox within its specified load and speed limits can help prevent excessive noise generation. Overloading or operating at high speeds beyond the gearbox’s capabilities can lead to increased noise.
  • Backlash: Excessive backlash or play between the gear teeth can lead to impact noise as the teeth engage. Proper backlash adjustment can help mitigate this issue.
  • Maintenance: Regular maintenance, including gear inspection, lubrication checks, and addressing any wear or damage, can help keep noise levels in check.

It’s important to note that while worm gearboxes can produce some noise due to the nature of gear meshing, proper design, maintenance, and operation can significantly reduce noise levels. If noise is a concern for your application, consulting with gearbox manufacturers and experts can provide insights into selecting the right gearbox type and implementing measures to minimize noise.

Worm Gearbox Applications in Robotics and Automation

Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:

  • Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
  • Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
  • Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
  • Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
  • Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
  • Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
  • Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
  • Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
  • Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
  • Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.

Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.

Application: Motor, Machinery, Agricultural Machinery, Paper Mill
Function: Distribution Power, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

Customized Request

Preventing Backlash in a Worm Gearbox

Backlash in a worm gearbox can lead to reduced accuracy, positioning errors, and decreased overall efficiency. Here are steps to prevent or minimize backlash:

  • High-Quality Components: Use high-quality worm gears and worm wheels with tight manufacturing tolerances. Precision components will help reduce backlash.
  • Proper Meshing: Ensure the worm gear and worm wheel are properly aligned and meshed. Improper meshing can lead to increased backlash.
  • Preload: Applying a small amount of preload to the worm gear can help reduce backlash. However, excessive preload can increase friction and wear.
  • Anti-Backlash Mechanisms: Consider using anti-backlash mechanisms, such as spring-loaded systems or adjustable shims, to compensate for any inherent backlash.
  • Lubrication: Proper lubrication can reduce friction and play a role in minimizing backlash. Use a lubricant that provides good film strength and reduces wear.
  • Maintenance: Regularly inspect and maintain the gearbox to identify and address any changes in backlash over time.

It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.

China supplier Worm Gearbox Used in Paper Industry   components of gearbox	China supplier Worm Gearbox Used in Paper Industry   components of gearbox
editor by CX 2023-08-31

worm drive gearbox

As one of the leading worm drive gearbox manufacturers, suppliers, and exporters of mechanical products, We offer worm drive gearbox and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of worm drive gearbox.

Recent Posts